User Manual Q&AAnswer
Dec 08, 2025 - 11:58 PM
To connect external effects devices to the Power Dynamics PDM-Series Powered Music Mixer for processing the FX bus, follow these steps:
1. **FX Output Connection:** Connect the FX Output jacks on the mixer to the input jacks of your external effects device using appropriate cables.
2. **External Effects Processing:** Adjust the FX Control on the mixer to set the level of the effect signal being sent to the external effects device.
3. **FX Return Connection:** Connect the output jacks of your external effects device back to the stereo Return jacks on the mixer using suitable cables.
4. **Adjusting FX Levels:** Use the Aux return Stereo control on the mixer to adjust the level at which the signal received at the return jacks is sent to the stereo L/R bus.
By following these steps, you can effectively integrate external effects devices into your setup to process the FX bus of the Power Dynamics PDM-Series Powered Music Mixer, enhancing your audio output with additional effects and processing capabilities.
Add New Comment