User Manual Q&AAnswer
Dec 08, 2025 - 04:38 PM
To install the MPS I2C GUI software and the USB driver for the MPS I2C Interface System, follow these steps as outlined in the user guide:
**Installing the MPS I2C GUI Software:**
1. Download the MPS I2C GUI software (MPS IIC GUI.rar) from the MPS website and extract it into a directory on your computer.
2. Double-click the .exe file to launch the setup guide. Follow the on-screen instructions to install the software. For example, if using the MP5515, select it during the installation process.
**Installing the USB Driver:**
1. Connect the MPS I2CUSB KIT to your PC using the black USB cable. Windows will detect the new hardware and prompt you to install the driver.
2. Select "Install from a list or specific location (Advanced)" and click "Next."
3. Choose "Don't search. I will choose the driver to install" and click "Next."
4. Press "Continue Anyway" to proceed with the driver installation. Wait for the installation to complete, then disconnect the USB cable from your PC.
5. If your PC displays an "unknown USB device" warning, try connecting the device to a different USB port. If the issue persists, contact your system administrator for further assistance.
By following these steps, you should be able to successfully install the MPS I2C GUI software and the USB driver for the MPS I2C Interface System, enabling you to utilize your MPS parts with I2C functionality effectively.
Add New Comment