User Manual Q&AAnswer
Dec 08, 2025 - 10:16 AM
To ensure safe and compliant usage of the HID iCLASS SE Connectivity Module, please follow these key safety considerations and usage instructions:
1. **Maintain Separation Distance:** Always maintain at least 20 cm of separation distance between the module and your body during operation. This is to comply with RF exposure guidelines and ensure safe usage.
2. **Avoid Co-location with Other Antennas or Transmitters:** Do not operate the module in conjunction with any other antenna or transmitter. The transmitter must not be co-located with other devices to prevent interference.
3. **Labeling Requirement:** Affix the provided label containing the FCC ID (JQ6-SECONNECT) and IC information (2236B-SECONNECT) to the outside of the final commercial product. This labeling is necessary for compliance purposes.
4. **Antenna Compatibility:** When using a new antenna, ensure that it is of the same type as the originally approved antenna and that the antenna gain is not higher than the originally tested antenna. Refer to the list of originally approved PCB antennas provided in the manual for guidance.
5. **Additional Testing:** Depending on the final host/module combination, additional testing against FCC Part 15B criteria for unintentional radiators may be required for proper authorization. Include the FCC Part 15 Statement in the user manual of the final commercial product if applicable.
6. **Caution for Modifications:** Any changes or modifications not expressly approved could void your authority to operate the equipment. Avoid making unauthorized modifications to the module.
By following these safety considerations and usage instructions outlined in the manual, you can ensure the safe and compliant operation of the HID iCLASS SE Connectivity Module.
Add New Comment