User Manual Q&AAnswer
Dec 08, 2025 - 03:46 AM
To check if the Simplecom NW811v2 AX1800 Dual Band WiFi 6 USB Adapter is properly installed on your Windows computer, follow these steps:
1. **Check Device Manager:**
- Type "Device Manager" in the search box on the taskbar and select it from the search results.
- In Device Manager, expand the "Network adapters" section.
- Look for the Simplecom NW811v2 AX1800 Dual Band WiFi 6 USB Adapter in the list of network adapters.
- If the adapter is listed without any exclamation or question marks, it indicates that the driver has been successfully installed.
2. **Driver Installation Confirmation:**
- Ensure that you have followed the driver installation instructions provided in the manual.
- The adapter should be recognized by your system after the driver installation process is completed.
- If the driver installation was successful, the adapter should appear in Device Manager under "Network adapters."
3. **Virtual CD Drive Removal:**
- After the driver installation is complete, the Virtual CD Drive associated with the adapter should disappear from your system.
- This removal indicates that the driver installation process has been successful.
4. **Network Connection:**
- Once the adapter is recognized and the driver is installed, you can proceed to connect to a Wi-Fi network using the adapter.
- Follow the instructions in the manual to connect to a Wi-Fi network using the Simplecom NW811v2 AX1800 Dual Band WiFi 6 USB Adapter.
By following these steps and checking Device Manager for the presence of the adapter without any errors, you can ensure that the Simplecom NW811v2 AX1800 Dual Band WiFi 6 USB Adapter is properly installed and ready to use on your Windows computer.
Add New Comment