User Manual Q&AAnswer
Dec 06, 2025 - 02:42 AM
To configure the Daviteq STHC-ISGWF-WS433-CL-04 iConnector WIFI using the iConfig app on your phone to connect it to a WiFi network, follow these steps:
1. **Power Supply:** Ensure the iConnector is supplied with power via the M12 connector.
2. **Download iConfig App:** Download the iConfig app on your Android phone.
3. **Initial Configuration:** Within the first 5 minutes of supplying power to the iConnector, open the iConfig app.
4. **WiFi Configuration:** Use the iConfig app to configure the WiFi Name and Password that the iConnector will connect to.
5. **Configuration Steps:** Follow the on-screen instructions in the iConfig app to input the necessary WiFi network details.
6. **Save Configuration:** Once you have entered the WiFi Name and Password, save the configuration in the app.
7. **Confirmation:** Confirm the configuration and ensure that the iConnector is connected to the correct WiFi network.
By following these steps and using the iConfig app on your phone, you can easily configure the Daviteq STHC-ISGWF-WS433-CL-04 iConnector WIFI to connect to a WiFi network for seamless operation in your IoT application.
Add New Comment