User Manual Q&AAnswer
Dec 06, 2025 - 01:57 AM
To set up the STS4 Wireless Intelliducer Node system for testing, follow these steps based on the information provided in the user manual:
1. **Assemble the Hardware Components:**
- Ensure you have all the necessary components listed in the manual.
- Follow the assembly procedures for the STS4-WBS Wireless Base Station, STS4 Nodes, and optional Automatic Load Position Tracker (ALPT) as outlined in the manual.
2. **Connect the Wireless Base Station to Your PC:**
- Turn on the wireless base station and connect it to your PC using the provided Ethernet cable.
- Ensure the wireless network "STS" is visible by the computer's network adapter.
3. **Install and Configure STS-LIVE:**
- Install the STS-LIVE application on your PC following the instructions provided in the manual.
- Establish a connection between the PC and the STS4-WBS by connecting wirelessly or via Ethernet.
4. **Connect Sensors and Nodes:**
- Connect sensors to the STS4 Nodes following the assembly procedure.
- Power on all STS4 Nodes and wait for them to establish a connection to STS-LIVE.
- If using the ALPT, power it on and ensure it connects to the application.
5. **Initiate Testing:**
- Launch the STS-LIVE application on your PC.
- Use the Hardware Tab or Display Tab to start collecting data and initiate tests.
6. **Review Data:**
- Access the recorded data saved in the specified location on your PC.
- Data is saved in a TDMS file format that can be viewed using STS-VIEW software or Microsoft Excel.
7. **Additional Support:**
- Refer to the STS-LIVE Help Guide within the application for further assistance.
- Watch training videos available on the BDI website or YouTube channel for detailed instructions on system operation.
By following these steps and referring to the detailed instructions provided in the manual, you can effectively set up and operate the STS4 Wireless Intelliducer Node system for testing purposes.
Add New Comment