User Manual Q&AAnswer
Dec 06, 2025 - 12:05 AM
To connect the uartBridge module to your third-party security or smart home system, follow these steps based on the provided manual:
1. **Ensure Compatibility:**
- Make sure that your wireless Ajax detectors, such as MotionProtect, DoorProtect, SpaceControl, GlassProtect, CombiProtect, FireProtect, and LeaksProtect, are compatible with the uartBridge module.
2. **Establish Connection:**
- Connect the uartBridge to the central unit of your third-party system using the UART interface. This interface allows communication between the uartBridge and your system.
3. **Limit Connected Devices:**
- Ensure that the total number of connected devices does not exceed the maximum supported limit of 110 devices.
4. **Position Detectors:**
- Place your wireless detectors within a maximum distance of 2,000 meters from the uartBridge receiver in an open area. This ensures optimal signal reception and communication.
5. **Power Supply:**
- Supply power to the uartBridge with a voltage of nominally 5V DC (within the range of 4.5-5.5V DC) to ensure proper functionality.
6. **Operating Conditions:**
- Operate the uartBridge within the specified temperature range of -10°C to +40°C and maintain the operating humidity within the recommended limits (up to 75%).
By following these steps, you can successfully integrate the uartBridge module with your third-party wireless security or smart home system, allowing you to expand your network of smart and secure Ajax detectors for enhanced monitoring and protection.
Add New Comment