User Manual Q&AAnswer
Dec 05, 2025 - 08:42 AM
To program your MOTOROLA DLR1020 Digital Business Two Way Radio for communication with another device, follow these steps:
1. Turn off the radio.
2. Hold down the push-to-talk (big circle button), plus button, and power button simultaneously. This action will put the radio into programming mode.
3. Once in programming mode, press the four-squared menu button located on the side of the radio. The radio should prompt, “profile ID, to change press plus or minus”.
4. Use the plus button to change the first digit of the code to 4.
5. Press the four-squared menu button to move to the second digit and use the plus button to change it to 6.
6. Press the four-squared menu button to move to the third digit and change it to 6. Repeat this step to change the fourth digit to 3.
7. Press the four-squared menu button again to lock in the code. The radio should display “profile ID saved as 4663”.
8. Once completed, your radios should now be programmed to work together for communication within the same network.
Refer to the MOTOROLA DLR1020 Digital Business Two Way Radio manual for more detailed instructions and troubleshooting tips.
Add New Comment