User Manual Q&AAnswer
Dec 04, 2025 - 02:43 AM
To assign the Symondo Sensor to a room using the Touch-To-Assign function, follow these steps:
1. Go to the 'Expert' menu on the Symondo Controller.
2. Navigate to 'Settings' and then select 'Rooms.'
3. Choose the room where you want to assign the sensor and ensure the sensor type is set to Temp./Humidity.
4. On the Symondo Sensor itself, locate the three touch areas.
5. Touch one of the three touch areas on the Symondo Sensor to assign it to the selected room.
6. The sensor will now be linked to the specified room for monitoring and control purposes.
By following these steps, you can easily assign the Symondo Sensor to a specific room using the Touch-To-Assign function, allowing for efficient management of your surface heating and cooling system.
Add New Comment