User Manual Q&AAnswer
Dec 03, 2025 - 01:12 PM
To set up the Algo 8028-SIP Doorphone for building access control, follow these steps based on the provided manual:
1. **Logging into CommPortal BG Admin:**
- Enter the administrative phone number and password to log in.
- If it's your first login, you will be prompted to change your password.
2. **Creating a New Phone Profile:**
- Select a department if the phone model is specific to one location or leave it blank for the entire business.
- Click on "manage your phone profile."
- Select "Create a new profile" and choose "Algo 8028-SIP Doorphone."
3. **Customizing Device Settings:**
- Basic Settings: Adjust speaker volume, Automatic Gain Control, Answer Inbound Calls, Ringback Tone, etc.
- Advanced Settings: Configure door control features like Momentary Open Code, Door Unlock Tone, Door Relay, etc.
- Advance Multicast: Customize multicast settings for paging and intercom.
4. **Adding Algo 8028-SIP Doorphone to the BG Admin:**
- Access the CommPortal BG Admin interface to configure BG lines and services.
5. **Network Configuration and Advanced Settings:**
- Set VLAN Mode, Differentiated Services SIP/RTP values, Device Name, System Integrity Checking, Timezone, NTP Time Server, etc.
6. **Provisioning Advance Audio and SIP Settings:**
- Configure Dynamic Range Compression, Jitter Buffer Range, SIP Transportation, etc.
7. **Firmware Upgrades:**
- Check for firmware upgrades and follow the instructions for updating the device.
By following these steps and referring to the Algo 8028-SIP Doorphone BG Admin Guide for detailed instructions, you can effectively set up the device for building access control. If you encounter any issues or need further assistance, you can contact customer service for support.
Add New Comment