User Manual Q&AAnswer
Dec 03, 2025 - 09:29 AM
To set the dehumidifier to a specific humidity level, follow these steps:
1. Press the "Humidity Set" button on the control panel to check the current environmental humidity.
2. Press the "Humidity Set" button again to enter the setting mode and adjust the target humidity level using the same button.
3. The range of target humidity levels available is 30% - 35% - 40% - 45% - 50% - 55% - 60% - 65% - 70% - 75% - 80%.
4. After setting the desired humidity level, the system will confirm the input value after 3 seconds, and the device will exit the setting state and return to displaying the current humidity level.
5. Note that in the drying mode, the target humidity cannot be changed.
By following these steps, you can easily set the dehumidifier to maintain the specific humidity level you desire in your room.
Add New Comment