User Manual Q&AAnswer
Dec 03, 2025 - 09:20 AM
To connect your Polaris ALPHA iQ+ Robotic Pool Cleaner to the iAquaLink app for remote control, follow these steps:
1. **Ensure Proper Setup:** Make sure your pool cleaner is fully submerged in water and the Control Box is connected and plugged into a GFCI outlet.
2. **Download iAquaLink App:** Download and install the iAquaLink app from the App Store or Google Play on your Wi-Fi and Bluetooth-enabled smart device (phone or tablet).
3. **Sign Up or Log In:** Open the iAquaLink app and either Sign Up or Log In to create or access your account.
4. **Add Your Cleaner:** Press the plus icon (+) at the top of "My Systems" in the app to add your pool cleaner.
5. **Connect to Wi-Fi:** Follow the on-screen prompts to connect the pool cleaner to Wi-Fi. The Wi-Fi light on the Control Box will blink when connected to the router and remain solid when connected to the internet.
6. **Pair with Bluetooth:** When prompted, press the connect button on the Control Box to begin pairing with Bluetooth. The Bluetooth light will blink when searching for a signal and remain solid when paired with your phone.
7. **Select Cleaning Mode:** Use the Control Box or iAquaLink app to choose the desired cleaning mode, such as Waterline only, Quick Clean, SMART Cycle, or Deep Clean.
8. **Start Cleaning:** Press the Start/Stop button on the Control Box or app to begin cleaning. You can also set a recurring cleaning schedule if desired.
9. **Monitor and Control:** Use the iAquaLink app to remotely control the cleaning mode, cycle time, and scheduling of your Polaris ALPHA iQ+ Robotic Pool Cleaner. You can also check the Wi-Fi and Bluetooth connectivity status of the cleaner through the app.
By following these steps, you can easily connect your Polaris ALPHA iQ+ Robotic Pool Cleaner to the iAquaLink app for convenient remote control and monitoring of your pool cleaning activities.
Add New Comment