User Manual Q&AAnswer
Dec 02, 2025 - 10:51 PM
To select the right plug size for your application when using the STANLEY Avseal High Performance Sealing, follow these steps:
1. **Determine the Diameter of the Hole:** Measure the diameter of the hole where you intend to use the sealing plug. The Avseal plugs are available in sizes ranging from 4 mm to 22 mm.
2. **Material Compatibility:** Ensure that the plugs are made of aluminum and the mandrel is made of stahl verzinkt as specified in the product information.
3. **Check Pressure Requirements:** Verify the pressure requirements of your application and ensure that it does not exceed 1800 bar, as indicated in the product specifications.
4. **Application Considerations:** The product is suitable for sealing holes in aluminum, cast iron, and steel housings, as well as transmissions. Consider the type of material and application where the plug will be used.
5. **Consult Stanley Engineered Fastening:** If you need assistance with selecting the right plug size or adapting it to your application requirements, reach out to Stanley Engineered Fastening. They can provide guidance on borehole design, accessibility to the setting point, and plant planning.
By following these steps and utilizing the resources provided by Stanley Engineered Fastening, you can ensure that you select the appropriate plug size for your specific application needs.
Add New Comment