Answer
Dec 02, 2025 - 12:44 PM
To properly install and maintain the QAZQA 105924 Shiny FL Black Wood Tripod floor lamp, follow these guidelines from the instruction manual:
1. **Installation by Authorized Technicians:** The luminaire should only be installed by authorized and qualified technicians in accordance with valid electrical installation regulations.
2. **Maintenance:** Maintenance should be limited to the luminaire's surfaces. Ensure no moisture comes into contact with terminal connections or voltage control parts during maintenance.
3. **Electrical Supply:** Always switch off the electrical supply before installing, maintaining, or repairing the lamp. Use a switch in the distribution box for this purpose.
4. **Exterior Installation:** Do not install the lamp outdoors during rain.
5. **Separation Distance:** Maintain the minimal separation distance from other objects and ensure there is sufficient room around the fitting.
6. **Consult Professionals:** If unsure, consult a professional, considering local installation requirements. Some countries may require lighting to be installed only by registered installers.
7. **Tightening Connections:** Ensure clamping screws in electrical connections are adequately tightened, especially with 12V low voltage conductors.
8. **Cleaning:** Clean the lamp with a clean, dry cloth or brush. Do not use solvents or abrasives, and avoid dampness on electrical components.
9. **Technical Information:** Consider all available technical information provided in the manual.
10. **Meaning of Symbols:** Familiarize yourself with the symbols in the manual, such as protection classes, minimum distance from lighted objects, lamp types, working voltage, dimmer compatibility, and disposal instructions.
By following these installation and maintenance guidelines, you can ensure the safety and optimal performance of your QAZQA 105924 Shiny FL Black Wood Tripod floor lamp.
User Manual Q&A

Add New Comment