User Manual Q&AAnswer
Dec 01, 2025 - 11:44 PM
To access the camera on your local network using the IP-Tool, follow these steps:
1. Make sure the camera and your PC are connected to the LAN.
2. Download the IP-Tool installer from www.vitekcctv.com/Downloads/Software/... and install it on your PC.
3. Open the installed application.
4. Modify the IP address of the camera. The default IP address is 192.168.226.201. Click on the camera information in the table to display the network information on the right side. Modify the IP address and gateway of the camera to ensure it is in the same local network segment as your computer's IP address.
5. After modifying the IP address, input the password of the administrator and click the "Modify" button to save the settings.
6. Double-click the IP address of the camera, and the system will open a web browser to connect to the IP-CAM. The IE browser may download an Active X control. Once downloaded, a login window will pop up.
7. Input the default username and password (admin / 123456) to log in and access the camera.
By following these steps, you should be able to access your VITEK VTD-TND4RFA4 Fixed IP Vandal Dome Camera on your local network using the IP-Tool.
Add New Comment