User Manual Q&AAnswer
Dec 01, 2025 - 11:07 PM
To access the camera on your local network using the IP-Tool, follow these steps:
1. Make sure the camera and your PC are connected to the LAN.
2. Download the IP-Tool installer from www.vitekcctv.com/Downloads/Software/... and install it on your PC.
3. Open the installed application and modify the IP address of the camera. The default IP address is 192.168.226.201. Adjust the IP address according to your network setup.
4. Double-click the IP address in the IP-Tool software, and a web browser will open to connect to the camera. Internet Explorer will download the Active X control. After downloading, a login window will appear.
5. Enter the default admin password: 123456 to log in.
By following these steps, you can access the VITEK VTC-TNB4RFA4-2 camera on your local network using the IP-Tool software.
Add New Comment