User Manual Q&AAnswer
Dec 01, 2025 - 08:53 PM
To set up the KB SOUND CC-1126-07 iSelect Basic sound system, follow these step-by-step instructions:
1. **Identify the parts:** Make sure you have all the components included in the KBSOUND® Basic kit, which should consist of a remote control (M), electronic unit (E), 2 1/2” loudspeakers (D, I), and an infrared receiver (R).
2. **Drill holes:** Drill two 75mm diameter holes for the loudspeakers and a 12mm hole for the receiver in the desired installation surface. Ensure that the receiver is placed in a visible spot without any obstacles blocking the infrared signal.
3. **Connect components:** Connect the left and right loudspeakers to the connecting terminals on the electronic unit (E). Also, connect the antenna signal wire to the antenna terminal (A) on the electronic unit.
4. **Position components:** Place the receiver and loudspeakers in their designated locations, ensuring that the cables are neatly arranged and not tangled.
5. **Power up the system:** Connect the power supply of 230V to the sound system's connecting terminals and turn on the system using the on/off switch.
6. **Adjust settings:** Use the control unit to select the MONO or STEREO setting based on the number of loudspeakers connected. You can also adjust the volume control and explore features like forced mono mode and IDEAL mode.
7. **Program turn-on mode:** If you want the system to automatically turn on when the power supply is activated, follow the steps outlined in the manual to set the turn-on mode as per your preference.
8. **Finalize setup:** Ensure that all connections are secure, and the system is placed in an optimal location for sound quality and remote control functionality.
By following these instructions and referring to the detailed manual provided with the product, you should be able to set up and start using the KB SOUND CC-1126-07 iSelect Basic sound system effectively in your home.
Add New Comment