User Manual Q&AAnswer
Dec 01, 2025 - 10:41 AM
To connect and start using the ACT AC6020 USB-C Smart Card ID Reader, follow these steps:
1. **Connecting the Device:**
- Plug the USB-C end of the smart card reader into an available USB-C port on your computer.
- Ensure that the device is securely connected to the port.
2. **Software Installation:**
- Ensure that your computer is running Mac OS X 10.8 or higher.
- Download and install Java from www.java.com.
- Visit the ACT Connectivity website at www.act-connectivity.com to download the latest drivers for the AC6020.
- Install the drivers on your computer by following the provided instructions.
3. **Using Smart Cards:**
- In order to use the AC6020, you will need a smart card or an eID card.
- Obtain the necessary software from your bank, government, or other certified instances that allow you to read from these types of cards.
- Install and configure the software as per the instructions provided by the issuer.
4. **Safety Information:**
- For safety information related to the ACT AC6020 USB-C Smart Card ID Reader, visit www.act-connectivity.com.
5. **Support and Updates:**
- For service, manuals, firmware updates, or any other assistance, visit www.act-connectivity.com.
- If you require further support or have specific queries, you can contact ACT at the provided address: ACT, Koolhovenstraat 1E, 3772 MT Barneveld, The Netherlands.
By following these steps and ensuring that you have the necessary software and drivers installed, you should be able to connect and use the ACT AC6020 USB-C Smart Card ID Reader with your computer successfully.
Add New Comment