User Manual Q&AAnswer
Dec 01, 2025 - 12:44 AM
To access the camera settings and live view remotely, follow these steps:
1. **Accessing the Camera Using the IP-Tool:**
- Make sure the camera and your PC are connected to the same LAN.
- Download the IP-Tool installer from the VITEK website and install it on your PC.
- Modify the camera's IP address to match your local network segment.
- Use the IP-Tool to connect to the camera and adjust settings as needed.
2. **Directly Access Through a Web Browser:**
- Manually set your PC's IP address to match the default settings of the camera.
- Open an Internet Explorer browser and input the camera's default IP address.
- Log in using the default username and password to view the live feed and adjust settings.
3. **WAN Configuration:**
- Ensure the camera is connected to the LAN and access its settings to modify the IP address and port number.
- Log into your router's management interface via a web browser and forward the camera's IP address and port in the "Virtual Server" settings.
- Use the WAN IP and HTTP port to access the camera remotely through a web browser.
By following these steps, you should be able to remotely access the VITEK VTD-TND4RMA4 camera for live viewing and configuration adjustments from anywhere with an internet connection.
Add New Comment