How do I access the camera remotely for viewing and managing it? (speco technologies O8VB2 Bullet Camera User Guide)

Answer

manuals.plus

Nov 30, 2025 - 09:48 PM


To access the Speco Technologies O8VB2 8 Megapixel H.265 IP Bullet Camera remotely for viewing and managing it, follow these steps:



1. **Configure Network Settings:** Power on the camera and use the software to configure the camera's network settings, such as IP address, subnet mask, gateway, and DNS.



2. **Adjust Camera Settings:** Access the camera's live view and adjust the camera angle and focus if necessary. You can also configure advanced settings like motion detection, alarm notification, and recording schedule.



3. **Port Forwarding:** If you want to access the camera remotely, you need to configure port forwarding on your router. Use your public IP address or domain name to access the camera.



4. **Web Operation and Login:** Make sure the camera and your PC are connected to the same local network. Install IP Scanner from the CD or download it from the manufacturer's website. Run the IP Scanner to find the camera's IP address. Enter the IP address in a web browser to access the camera's web viewer.



5. **Login Credentials:** The default username is "admin" and the default password is "1234." Enter these credentials to log in and follow any additional directions to install plugins if prompted.



By following these steps, you should be able to access and manage your Speco Technologies O8VB2 camera remotely for monitoring and configuration purposes. For further assistance or troubleshooting, you can contact Speco Technologies Tech Support at 1-800-645-5516.