User Manual Q&AAnswer
Nov 30, 2025 - 03:46 AM
To test if the door switch-sensor-set is working properly, follow these steps:
1. Ensure that the power supply is connected to the sauna control unit.
2. Open and close the sauna door while observing the sauna control unit. You should see a corresponding indication on the control unit display when the door is closed and when it is open.
3. If the control unit does not register the door status correctly, check the following:
- Make sure the door sensor is securely mounted outside the sauna cabin near the sauna door, maintaining a minimum distance of 10 cm from the door hinge.
- Verify that the magnet on the sauna door is flush with the sensor and correctly positioned.
- Double-check the connection of the door switch-sensor-set to your sauna control unit as per the manufacturer's instructions.
4. If the sensor is still not functioning correctly, consult the troubleshooting section of the installation manual or contact the supplier for further assistance.
Regularly testing the door switch-sensor-set ensures the safety and proper functioning of your sauna by monitoring the closed sauna door effectively.
Add New Comment