User Manual Q&AAnswer
Nov 29, 2025 - 11:24 PM
To connect multiple devices to the CHAUVET PROFESSIONAL PowerStream 4 IP Splitter and ensure you do not exceed the maximum current limit, follow these steps:
1. **AC Power Setup:**
- Plug a power cord into the power input connector of the PowerStream 4 IP.
- Plug your additional products into the power output connectors of the PowerStream 4 IP.
- You can daisy-chain additional PowerStream 4 IP products by plugging them into any empty power output connector.
- Make sure that the total current of all devices connected through the PowerStream 4 IP does not exceed 16A.
2. **Maximum Current Limit:**
- The maximum pass-through current for the PowerStream 4 IP is 16A. Do not exceed this rating.
- The maximum current for any power output on the PowerStream 4 IP is also 16A. Ensure you do not exceed this limit.
By following these guidelines, you can safely connect multiple devices to the PowerStream 4 IP Splitter without surpassing the maximum current limits specified in the product manual.
Add New Comment