User Manual Q&AAnswer
Nov 29, 2025 - 01:30 PM
To set up the ANSMANN AES4 Timer LCD Display Switch in random mode for enhanced security when you are away from home, follow these steps as outlined in the user manual:
1. **Activate Random Mode:**
- Press the RANDOM button on the timer at least 30 minutes before the desired ON time.
- The LCD screen will display "RANDOM" to indicate that the random mode function is activated.
2. **Program the Timer:**
- Set a program within the interval from 6:31 pm to 5:30 am the next morning.
- If you want to set multiple programs to run in random mode, ensure that the OFF time of the first program is at least 31 minutes before the ON time of the second program.
3. **Activate Random Function:**
- Once the programs are set, activate the RANDOM key on the timer at least 30 minutes before the programmed ON time.
- The LCD will display "RANDOM" to confirm that the random function is activated.
- Plug the timer into a socket, and it will be ready for use.
4. **Cancel Random Function:**
- To deactivate the random mode, simply press the RANDOM button again, and the "RANDOM" indicator will disappear from the display.
By following these steps, you can utilize the random mode feature of the ANSMANN AES4 Timer LCD Display Switch to create the illusion of activity in your home even when you are away, enhancing security and deterring potential intruders.
Add New Comment