User Manual Q&AAnswer
Nov 29, 2025 - 09:01 AM
If the sensor does not respond to motion when using the LUTRON JPZ0138 Athena Wireless Node fixture control system, follow these steps to troubleshoot the issue:
1. **Check Association:** Ensure that the sensor is associated with the system. If the sensor is not associated, it may not respond to motion. Refer to the product manual for instructions on how to properly associate the sensor with the system.
2. **Verify Wiring:** Check the wiring connections to ensure that the control lines are wired properly. Incorrect wiring can lead to issues with sensor responsiveness. Make sure all connections are secure and properly aligned as per the wiring guide provided in the manual.
3. **Driver Activation:** Verify that the driver with self-powered DALI link has the DALI power supply activated. The driver must be properly activated to ensure the sensor functions correctly. Refer to the driver manufacturer's instructions for details on activating the DALI power supply.
4. **Adjust Low-End Trim:** If the lights are unstable at the low-end, adjust the low-end trim as per the Athena documentation available on www.lutron.com. Proper adjustment of the trim can help stabilize the lights at lower intensities.
5. **Daylighting Override:** If the "Raise" button on the control does not increase the light level above the Daylighting level, it may be necessary to disable daylighting from the Athena application to override the preset levels. Follow the instructions in the manual to disable daylighting if needed.
6. **Color Temperature Control:** If the End-of-Line Test does not affect the color temperature of the fixture, confirm that the driver supports color temperature control via IEC62386-209 if using DALI. Color temperature control is not supported in 0-10V control applications.
By following these troubleshooting steps and referring to the LUTRON JPZ0138 Athena Wireless Node user manual for detailed instructions, users can address issues with sensor responsiveness and ensure proper functionality of the fixture control system. If the problem persists, contact Lutron customer assistance for further support.
Add New Comment