User Manual Q&AAnswer
Nov 27, 2025 - 02:08 PM
To start a measurement cycle using the E-VLT Leak Detector, follow these steps:
1. **Selecting a Battery to Test:**
- Navigate to the main menu screen and select the "Selecting a Battery to Test" option.
- Follow the prompts to select the desired battery for testing.
2. **Starting the Cycle:**
- Once you have selected the battery to test, navigate back to the main menu screen.
- Select the "Starting and Stopping Cycle" option.
- Follow the prompts to begin the testing process.
3. **Monitoring the Cycle Phases:**
- The measurement cycle consists of four main phases: Fill, Stabilization, Test, and Dump.
- During the cycle, the device will display the progress through these phases on the measurement cycle screen.
4. **Completion and Results:**
- At the end of the test time, the results of the measurement cycle will be displayed on the screen.
- The results will indicate whether the test passed, failed, or if there is an alarm code.
5. **Stopping the Cycle:**
- If you need to stop the current measurement cycle at any point, press the Stop key.
By following these steps, you can effectively start and monitor a measurement cycle using the E-VLT Leak Detector. For more detailed information on program parameters, battery adjustments, and configuration settings, refer to the user manual provided with the device.
Add New Comment