User Manual Q&AAnswer
Nov 27, 2025 - 08:41 AM
To connect the RC-SPIRIT2-915 module to an external microcontroller, follow these steps:
1. **Hardware Connection:** Connect the module to the external microcontroller via the SPI interface. Ensure the connections are secure and aligned correctly.
2. **Programming:** Program the module as per your project requirements using the programmable features available. This can be done through the SPI interface from your external microcontroller.
3. **Antenna Connection:** Connect the antenna to the module using either a UFL connector or a pad version, depending on the module version you have.
4. **Usage:** Once the module is connected and programmed, it is ready to be used for various applications such as low-power wireless systems, home and building automation, smart grid and automatic meter reading, wireless sensor networks, and 6LoWPAN systems.
By following these steps, you can effectively integrate the RC-SPIRIT2-915 module with your external microcontroller and utilize its features for your project requirements. For more detailed information and technical specifications, refer to the user guide and datasheets provided by Radiocontrolli and STMicroelectronics.
Add New Comment