User Manual Q&AAnswer
Nov 26, 2025 - 05:06 AM
To power on the DJI Ronin 4D Flex and start/stop recording using the Power Button on the Gimbal Connector Module, follow these steps:
1. **Powering On:**
- Press and hold the Power Button on the Gimbal Connector Module to power on the Ronin 4D Flex.
- The device will start up, and you will see indicators that it is powered on.
2. **Starting/Stopping Recording:**
- Once the device is powered on, you can press the Power Button once to start recording.
- Press the Power Button again to stop the recording.
- The device will indicate the recording status through visual cues.
3. **Powering Off:**
- To power off the Ronin 4D Flex, press and hold the Power Button until the device shuts down completely.
Remember to always ensure that the safety lock of the Ronin 4D Flex is in the correct position before operating the device. Additionally, refer to the user manual for more detailed instructions and safety guidelines.
Add New Comment