User Manual Q&AAnswer
Nov 25, 2025 - 03:43 PM
To set up the Reolink B0B7JBQW8C WiFi Floodlight, follow these steps as per the user manual:
1. **Download Reolink App or Client Software:**
- Download and launch the Reolink App or Client software on your smartphone or PC.
- You can scan the QR code in the Quick Start Guide to download the Reolink App.
- For the Reolink Client software,.
2. **Initial Setup:**
- Follow the onscreen instructions to finish the initial setup.
- Make sure to complete the WiFi configuration first during the setup process.
3. **Installation:**
- Install the Floodlight 2-3 meters (7-10 ft) above the ground for optimal PIR motion sensor detection range.
- For better motion detection performance, install the floodlight angularly.
4. **Mounting:**
- Drill holes according to the mounting template provided.
- Secure the mounting plate to the wall with screws and hang the floodlight on it.
- Lock the floodlight in position with the lower xxxx .
5. **Troubleshooting:**
- If the floodlight is not powering on, check the power adapter connection and the power outlet.
- Press the reset button with a pin to restore factory settings if needed.
- If issues persist, contact Reolink Support for assistance.
6. **Specifications:**
- The Reolink Floodlight WiFi complies with FCC Rules and Directive 2014/53/EU.
- Hardware features include 40pcs/18W light, dimensions of 216X118X160mm, and a weight of 635g.
7. **Technical Support:**
- For any technical assistance, visit the official Reolink support site.
By following these steps and guidelines provided in the user manual, you can successfully set up and start using your Reolink B0B7JBQW8C WiFi Floodlight for enhanced security and convenience.
Add New Comment