User Manual Q&AAnswer
Nov 25, 2025 - 01:13 PM
According to the instruction manual, the U-Prox WDC Mini Alarm System comes with a CR2 lithium battery pre-installed, which has a service life of up to 5 years. If the battery needs to be replaced, follow these steps:
1. **Locate the Battery Compartment:** The battery compartment is typically located within the device. Refer to the device's user manual for specific instructions on accessing the battery compartment.
2. **Remove the Old Battery:** Once you have accessed the battery compartment, carefully remove the old CR2 lithium battery from the device.
3. **Insert the New Battery:** Take a new CR2 lithium battery and insert it into the battery compartment, ensuring the correct polarity (+ and -) alignment.
4. **Close the Battery Compartment:** Securely close the battery compartment to ensure the battery is properly in place.
5. **Testing:** After replacing the battery, test the device to ensure it is functioning correctly. You may need to reconfigure the device with the U-Prox Installer mobile application after replacing the battery.
Remember to dispose of the used battery according to national regulations to prevent any risk of explosion. If you encounter any issues during the battery replacement process or need further assistance, you can refer to the user manual or contact support@u-prox.systems for help.
Add New Comment