User Manual Q&AAnswer
Nov 25, 2025 - 12:30 PM
To set up your SUNLUX XL-3620 2D Barcode Scanner for different interfaces and keyboard layouts, follow these steps based on the information provided in the instruction manual:
1. **Connecting the Scanner:**
- Connect the scanner to the PC port using the dedicated joint.
- Ensure the barcode configuration is turned on.
2. **Enabling/Disabling Configuration Function:**
- Scan the "Enable Configuration Function (Default)" barcode to enable configuration.
- Scan the "Disable Configuration Function" barcode to disable configuration.
3. **Restoring Factory Default Configuration:**
- Scan the "Restore Factory Default Configuration" barcode to reset the scanner to factory settings.
4. **Saving User Configuration:**
- Scan the "Save" barcode to save current parameters as user configuration.
- Scan the "Restore User Configuration" barcode to restore a saved user configuration.
5. **Selecting Data Interface:**
- Scan the corresponding barcode for the desired data interface (USB-KBW, RS232, USB Virtual Com).
6. **Configuring Keyboard Layout:**
- Scan the barcode corresponding to the desired keyboard layout (e.g., English, French, German).
7. **Setting Virtual Keyboard Mode:**
- Scan the barcode for the preferred virtual keyboard mode (Mode 1, Mode 2, Mode 3).
8. **Configuring Barcode Encoding:**
- Use the manual to set up barcode encoding if peculiar characters affect output accuracy.
9. **Adjusting USB Keyboard Transfer Speed:**
- Scan the barcode for the desired scanning speed (Low, Middle, High).
10. **Other Configurations:**
- Follow the manual for specific settings related to barcode types, prefix/suffix configuration, and output options.
By following these steps and referring to the detailed instructions in the manual, you can configure your SUNLUX XL-3620 2D Barcode Scanner to suit your specific requirements.
Add New Comment