User Manual Q&AAnswer
Nov 25, 2025 - 08:56 AM
According to the user manual for the Attogene AU2030 Cadmium Lateral Flow Kit, proper storage is crucial for maintaining the integrity of the kit components and ensuring accurate test results. Here are the storage guidelines:
1. **Before Use:**
- The kit should be stored at a temperature range of 2°C - 30°C (35.6°F - 86°F) until it is ready to be used.
- The test components must remain in the sealed pouch until they are ready to be used to prevent any contamination or degradation.
2. **After Use:**
- Ensure that any unused test components are properly sealed and stored according to the temperature range mentioned above.
- Dispose of used components properly to avoid any potential cross-contamination between samples.
By following these storage recommendations, you can help maintain the effectiveness of the Cadmium Lateral Flow Kit and ensure reliable test results for screening Cadmium in water samples at 5 ppb.
Add New Comment