User Manual Q&AAnswer
Nov 21, 2025 - 02:51 PM
To set up your ALTOS T430 Thin Client, follow these steps:
1. **Install the Stand:**
- Place the thin client on a stable surface.
- Install the stand provided with the thin client.
2. **Connect the Power Source:**
- Plug the power adapter into a power outlet.
- Connect the power adapter to the thin client.
3. **Connect the Network Cable:**
- Connect one end of the network cable to the thin client.
- Connect the other end to your network router or switch.
4. **Attach the Thin Client Behind the Monitor:**
- Position the thin client behind your monitor.
- Securely fasten the thin client to the monitor using the appropriate mounting hardware.
Before working on your thin client, ensure you follow these steps:
- Save and close all open files and applications.
- Shut down the thin client properly.
- Disconnect all cables and peripherals from the thin client.
After working on your thin client, remember to:
- Reinstall any removed screws to avoid damage.
- Reconnect all devices and peripherals.
- Power on your thin client.
For detailed instructions on setting up your ALTOS T430 Thin Client, refer to the user guide provided with the product.
If you have any specific questions or encounter any issues during the setup process, please consult the user guide for troubleshooting tips or reach out to customer support for further assistance.
Add New Comment