User Manual Q&AAnswer
Nov 21, 2025 - 01:22 PM
To connect the HD MicroCamera to the base unit for operation, follow these steps:
1. **Connect the base unit to the flexible cable and camera head:**
- Ensure the base unit is powered off before connecting the flexible cable and camera head.
- Connect the flexible cable to the base unit according to the provided instructions.
- Attach the camera head securely to the other end of the flexible cable.
2. **Insert the camera head into the area you wish to inspect:**
- Carefully insert the camera head into the cavity, shaft, masonry, or vehicle you intend to inspect.
- Make sure the camera head is positioned correctly for optimal viewing.
3. **Monitor the images on the LCD screen of the base unit:**
- Power on the base unit and observe the live video feed from the HD MicroCamera on the LCD screen.
- Adjust the camera head position if needed to capture clear images within the depth of focus range (3 to 8 cm).
By following these steps, you can successfully connect and operate the HD MicroCamera with the base unit to inspect hard-to-reach locations effectively. Remember to refer to the operating instructions for detailed guidance and safety precautions.
Add New Comment