User Manual Q&AAnswer
Nov 20, 2025 - 03:54 PM
The recommended interval for replacing the filters on the ACCUREX 486124 XID Mixed Flow Square Duct Adapter is based on the intervals recommended by the filter supplier. It is essential to follow the guidelines provided by the supplier to ensure optimal performance and air quality.
To replace the filters, follow these steps as outlined in the product manual:
1. Remove the access door using a 1/2 inch socket.
2. Remove the dirty filters and replace them with new filters in the unit.
3. Replace the filter spacers as well.
4. Ensure that the filters are installed in the correct orientation for proper airflow (marked on filters).
5. Locate the spacers towards the outside of the unit to reduce any unnecessary blockage in airflow.
6. Reinstall the access door using a 1/2 inch socket and torque to 132 in∙lbs (11 ft·lbs). Do not over-tighten.
By following these steps and adhering to the recommended filter replacement intervals, you can maintain the efficiency and effectiveness of the ACCUREX 486124 XID Mixed Flow Square Duct Adapter in improving air quality and removing impurities.
Add New Comment