User Manual Q&AAnswer
Nov 20, 2025 - 02:44 PM
To set up the AI Multi-object detection feature on the sunell SN-IPR8081CBAW-B IR Bullet AI Network Camera, follow these steps as outlined in the user manual:
1. **Access the Configuration Menu:** Log in to the camera's web interface using a compatible web browser.
2. **Navigate to Intelligent Analysis Settings:** Go to "Configuration > AI Multi object" in the camera's interface.
3. **Enable Detection:** Within the AI Multi-object settings, you can enable specific detection features such as face detection, full body detection, and vehicle detection.
4. **Adjust Detection Parameters:** Set the parameters for each type of detection to customize the sensitivity and accuracy of the AI detection algorithms.
5. **Optimize Performance:** For better capture performance, it is recommended to use a 6mm focus length lens or above to ensure clear and accurate detection results.
6. **Save Settings:** Once you have configured the AI Multi-object detection settings to your preference, save the changes to apply them to the camera's surveillance capabilities.
By following these steps, you can effectively set up and configure the AI Multi-object detection feature on the sunell SN-IPR8081CBAW-B IR Bullet AI Network Camera to enhance its surveillance capabilities and improve security monitoring.
Add New Comment