User Manual Q&AAnswer
Nov 20, 2025 - 01:44 PM
#### Installation Steps:
1. **Open Package Examination:**
- Check the appearance of the product for any damage and confirm the items in the package.
- Ensure the packing list includes the Eyeball Network Camera, Quick Setup Guide, accessory package, and location sticker.
2. **Device Structure:**
- The camera has ports for SD card slot, CVBS video out, and a reset button.
- The fill light settings offer different modes for various lighting conditions.
3. **Multi-head Cable Description:**
- The multi-head cable provides connections for network access, power supply, audio input/output, reset button, and alarm functions.
4. **Device Installation:**
- Disassemble the camera's base and fix it to the ceiling or wall using self-tapping screws.
- Connect the multi-connector cable and ground wire if needed.
- Adjust the camera's position to face the monitored area and secure it in place.
5. **Quick Configuration (e.g., IE):**
- Login to the camera using Internet Explorer with the default IP address (192.168.0.120) and default credentials (admin/admin).
- Modify the IP address and other settings as required for your network.
- Configure trusted sites and ActiveX controls for proper video playback.
- Access live video, personnel count, AI live video, and intelligent analysis features through the web interface.
6. **Special Announcement:**
- Ensure you are using genuine products from the manufacturer to avoid counterfeit items.
- Regularly update the manual and software for any enhancements or changes.
By following these steps, you can successfully install and configure the SUNELL SN-IPR8041CQAW-B Eyeball Network Camera for surveillance purposes. For more detailed instructions and troubleshooting, refer to the user manual provided with the product.
Add New Comment