How do I connect the LiveShell W Compact Streaming Encoder to a network for streaming purposes? (CEREVO CDP-LS05A Streaming Encoder User Guide)

Answer

manuals.plus

Nov 19, 2025 - 10:23 AM

To connect your LiveShell W Compact Streaming Encoder to a network for streaming, follow these steps:

1. **Initial Preparation:** Plug in the power supply using the Type-C connector to the POWER/MAIN USB-C port on the rear of the LiveShell W unit.

2. **Setup Network Connection:**

- **Using a Wireless LAN Connection:** Connect the included wireless LAN adapter to the LiveShell W unit. Press and hold the power button for 5 seconds to turn on the power. Make sure to follow the order of steps correctly.

- **Using an Ethernet Connection:** Connect an Ethernet cable to the LiveShell W unit. Press and hold the power button for 5 seconds to turn on the power. Ensure the correct order of steps is followed.

3. **Connection to LiveShell Studio:**

- **Using a Wireless LAN Connection:** Access the main menu on the LiveShell W unit, navigate to [Network] > [AP Mode], and select [AP Mode On]. Follow the on-screen instructions to connect to LiveShell Studio via wireless LAN.

- **Using an Ethernet Connection:** Network settings are automatically configured based on the connected network.

4. **Confirm URL and Login Information:**

- Press the control dial on the LiveShell W unit, select [MAIN MENU] > [Network] > [Web Login]. Confirm the displayed user name, password, and URL.

5. **Open Web Browser:** Ensure your PC or tablet is connected to the same network as the LiveShell W unit. Open a web browser and enter the URL displayed on the LiveShell W unit.

6. **Enter User Name and Password:** Enter the user name and password displayed on the LiveShell W unit.

7. **LiveShell Studio Initial Setup Confirmation:** The setup is complete when the LiveShell Studio top screen appears on your web browser.

For more detailed instructions and troubleshooting tips, refer to the LiveShell W Online Manual.