User Manual Q&AAnswer
Nov 19, 2025 - 08:41 AM
To set up multiple programs on the Hunter X-Core Irrigation Controller, follow these steps:
1. **Setting Up Additional Programs:**
- Turn the dial to the PROG position.
- Press the PRG button to select a program (A, B, or C).
- Use the + and - buttons to set the desired start time for the selected program.
- To add another program, press the PRG button again and repeat the steps above to set a start time for the new program.
2. **Managing Station Run Times for Each Program:**
- Turn the dial to the RUN TIME position.
- Use the PRG button to select the desired program (A, B, or C).
- Use the + and - buttons to adjust the station run times for each program. You can set run times from 1 minute to 4 hours for each station within the selected program.
3. **Setting Watering Days for Each Program:**
- Turn the dial to the WATER DAYS position.
- Select the program (A, B, or C) using the PRG button.
- Use the + and - buttons to choose the desired watering days for each program. You can set specific days for watering or designate non-active days as needed.
4. **Utilizing Seasonal Adjust for Each Program:**
- Turn the dial to the SEASONAL ADJUST position.
- Use the + and - buttons to adjust the percentage of the seasonal adjust feature for each program. This allows you to customize watering durations based on seasonal changes.
By following these steps, you can easily set up and manage multiple programs on the Hunter X-Core Irrigation Controller to tailor your watering schedules to the specific needs of different zones in your landscape.
Add New Comment