User Manual Q&AAnswer
Nov 19, 2025 - 03:56 AM
To connect the camera to a recording system and set up the OSD menu for video configuration, follow these steps based on the provided manual:
1. **Connecting the Camera to Recording System:**
- Connect the camera to the recording system using the appropriate connectors provided (Power Input Port, BNC Video Output Port, Audio Input, Power Output).
- Ensure that the power input is compatible with the camera's power requirements (12Vdc/~24Vac).
- Make sure to use the correct cables and connectors to establish a secure connection between the camera and the recording system.
2. **Setting up the OSD Menu for Video Configuration:**
- Use the recorder to access and configure the OSD menu settings for the camera.
- Connect the camera to the recording system as per the instructions provided.
- Right-click on the camera's window using a mouse connected to the recording system.
- Select the PTZ (Pan-Tilt-Zoom) option to access the OSD menu for camera setup.
- Navigate through the OSD menu options to configure video settings such as signal type (CVI, TVI, AHD, FBAS), switch settings, and other parameters as needed.
- Depending on the firmware version, the OSD menu may vary, so refer to the manual for specific instructions related to your camera model.
By following these steps, you should be able to successfully connect the camera to a recording system and configure the OSD menu for video setup according to your preferences and requirements. If you encounter any difficulties or have specific questions about the setup process, refer to the detailed installation guide and security note provided with the camera for additional assistance.
Add New Comment