User Manual Q&AAnswer
Nov 18, 2025 - 01:09 PM
If your Whirlpool 9 Kg 9014 Front Load Washing Machine is not turning on, there are a few possible reasons and troubleshooting steps you can take:
1. **Check Power Supply:** Ensure that the plug is correctly inserted into the power socket and that the socket is providing power. You can test the socket by plugging in another appliance to see if it works.
2. **Faulty Plug:** If the plug is faulty, try using a different plug or adapter to see if the machine turns on.
3. **Power Failure:** In case of a power failure, wait for the power supply to be restored and switch the fuse back on if necessary.
4. **Door Not Closed Properly:** Make sure the door of the washing machine is closed securely. The machine will not start if the door is not closed properly.
5. **Time Delay Setting:** If your machine has a time delay function, wait for the set delay time to end or switch the machine off to reset it. Refer to the user manual for instructions on how to adjust the time delay setting.
6. **Start/Pause Button:** Press the "Start/Pause" button to initiate the program. Ensure that the program has been selected and the cycle has been started.
7. **Key Lock Function:** If the Key Lock function is enabled, refer to the user manual on how to disable it. The machine will not start if the Key Lock function is activated.
If you have tried these troubleshooting steps and the issue persists, it is recommended to refer to the user manual for further guidance or contact the After-sales Service Centre for assistance.
Add New Comment