User Manual Q&AAnswer
Nov 18, 2025 - 08:52 AM
To adjust the temperature range on the Danfoss Aero RA Click Remote Sensor, follow these steps:
1. Locate the dial on the sensor that allows you to adjust the temperature range.
2. Turn the dial to set the maximum temperature value. For example, if you want the maximum temperature to be 4 degrees Celsius, turn the dial until you see "MAX=4" on the display.
3. Next, set the minimum temperature value by turning the dial. For a minimum temperature of 2 degrees Celsius, turn the dial until you see "MIN=2" on the display.
4. Once you have set the desired temperature range, ensure that the sensor is properly installed on the return pipe and away from the heat source.
5. Turn on the heating system and monitor the temperature to ensure it stays within the range you have set.
If you encounter any difficulties or need further assistance with adjusting the temperature range on the Danfoss Aero RA Click Remote Sensor, refer to the full user manual or contact Danfoss customer support for help.
Add New Comment