User Manual Q&AAnswer
Nov 17, 2025 - 03:37 PM
To adjust the controller settings on your Mini Maxi Static RO System, follow these steps:
1. Press and hold the down and enter buttons simultaneously to enter the menu.
2. Press the enter button repeatedly until you see "FOd" displayed, which stands for Fill on Demand.
3. Use the up or down buttons to switch between the on and off settings. "Off" sets the controller to one-time fill, while "ON" sets it to fill on demand.
4. Press enter to move to the next setting.
5. If you see "Fill Delay" displayed, it means the system will have a delay in refilling after the tank is full. You can set this delay from 0 to 10 minutes using the up and down buttons. Setting it to "0" turns the delay off.
6. Press enter to proceed to the next setting.
7. Adjust the Auto Flush mode by using the up and down buttons to select one of the three options: Off (not recommended), Autoflush every hour, or Autoflush once at the start of every fill for 300 seconds (default setting).
8. Press enter to move to the next setting.
9. Once you have adjusted the settings as needed, you can exit the menu by pressing the appropriate buttons or waiting for the system to automatically exit the menu.
Refer to the manual for more detailed instructions and illustrations on adjusting the controller settings of your Mini Maxi Static RO System.
Add New Comment