User Manual Q&AAnswer
Nov 17, 2025 - 03:26 PM
To adjust the temperature settings on the Danfoss Aero RA Click Thermostatic Sensors, follow these steps:
1. **Maximum Setting:** Turn the dial on the product until it reaches the number 4. This will set the maximum temperature limit.
2. **Minimum Setting:** Turn the dial on the product until it reaches the number 2. This will set the minimum temperature limit.
3. **Testing:** After adjusting the temperature settings, it is recommended to test the product to ensure that it is functioning correctly.
Remember to refer to the installation guide provided with the product for detailed instructions on setting up and installing the Danfoss Aero RA Click Thermostatic Sensors. Additionally, ensure that the blind mark is properly aligned during installation for accurate temperature control.
Add New Comment