User Manual Q&AAnswer
Nov 17, 2025 - 11:33 AM
To connect and start using the U-Canister RFID Module, follow these steps as outlined in the user manual:
1. **Connect CAN to USB Converter:** Begin by connecting the CAN to USB Converter to the module. This connection will enable communication between the module and your system.
2. **Select Bit Rate:** Once the connection is established, select the Bit Rate of 250kBit/s using the appropriate settings on your system. This step is crucial for ensuring proper data transmission between the module and your equipment.
3. **Press OK Button:** After selecting the Bit Rate, press the OK button to confirm the settings. This action will finalize the configuration and prepare the module for detecting RFID tags.
4. **RFID Tag Detection:** When the module is powered on and operational, it will start detecting RFID tags within its range. Any detected RFID tag information will be displayed in the Message window of your system.
By following these steps, you can successfully connect and use the U-Canister RFID Module with your equipment. Remember to refer to the user manual for detailed instructions and troubleshooting tips if you encounter any issues during the setup process.
Add New Comment