User Manual Q&AAnswer
Nov 16, 2025 - 04:11 PM
After installing the Wi-Fi module on the NT+ Series display panel, you can verify its proper functioning by following these steps:
1. Power on the display panel.
2. Check for any indicator lights on the Wi-Fi module itself. Some modules may have LED lights that indicate power or connectivity status.
3. Access the display panel's settings menu and look for a Wi-Fi or network option. If the Wi-Fi module is functioning correctly, you should see available networks to connect to.
4. Attempt to connect the display panel to a Wi-Fi network. If the connection is successful, you should be able to access online content or services through the panel.
If you encounter any issues during this process or if the Wi-Fi module does not appear to be functioning properly, please contact our Technical Support Team for further assistance. Remember not to attempt to insert or remove the Wi-Fi module while the display panel is powered on to avoid any potential damage.
Add New Comment