User Manual Q&AAnswer
Nov 16, 2025 - 04:11 PM
To program a personal entry code for your Ford's Keyless Entry system, follow these steps:
1. **Enter the Factory-Set Code:**
- Locate the factory-set five-digit code. This code is typically found on the owner’s wallet card in the glove box or can be obtained from an authorized dealer.
2. **Initiate Programming Mode:**
- Press the 1/2 button on the keypad within five seconds of entering the factory-set code.
3. **Enter Your Personal Five-Digit Code:**
- Input your desired personal five-digit code using the keypad. Each number must be entered within five seconds of each other.
4. **Save Your Personal Code:**
- Press the 1/2 button again to store your personal code. The doors will lock and then unlock to confirm that the programming was successful.
5. **Program Additional Personal Entry Codes (Optional):**
- To set up more personal entry codes, repeat Steps 1-3 for each additional code.
- For each new code, use a different control combination (e.g., 3/4, 5/6, 7/8, 9/0) to save the code.
**Tips:**
- Avoid using a code that consists of five of the same number or five numbers in sequential order to enhance security.
- Remember that the factory-set code will remain functional even after setting up your personal codes.
By following these steps, you can successfully program your own personal entry code for the Ford Keyless Entry system, providing you with convenient and secure access to your vehicle.
Add New Comment