User Manual Q&AAnswer
Nov 15, 2025 - 04:40 AM
**Connecting Multiple Fixtures in a Series:**
- The maximum number of ANOLiS Eminere Side fixtures that can be connected in a series without using Booster boxes depends on factors such as cable length, power voltage, and the type of Eminere Side model.
- The tables provided in the user manual outline the maximum theoretical number of fixtures that can be connected in series based on different cable lengths and voltages for Eminere Side 2, 3, and 4 models.
- Ensure that the fixtures are connected in the correct order and that the total cable length does not exceed the recommended limits for each configuration.
**DMX Addressing and Setup:**
- DMX addressing of the connected Eminere Side fixtures must be done manually using the Robe Universal Interface WTX and the software RDM Manager.
- The number of connected fixtures in the DMX chain will also depend on factors such as cable length, power voltage, and the specific model of the Eminere Side fixture.
- The user manual provides detailed instructions on how to link and unlink fixtures from the DMX transmitter, as well as how to address the fixtures in the DMX chain.
**Additional Tips:**
- Always refer to the user manual for specific instructions on connecting and addressing the fixtures.
- Ensure that the fixtures are powered off before making any connections or adjustments to the DMX setup.
- If in doubt, consult with a qualified electrician or technical support for assistance with setting up and configuring multiple fixtures in a series.
By following the guidelines provided in the user manual and paying attention to the specific requirements for connecting and addressing the fixtures, users can successfully set up and operate multiple ANOLiS Eminere Side Wireless DMX LED Lights in a series configuration.
Add New Comment