User Manual Q&AAnswer
Nov 14, 2025 - 03:32 PM
To adjust the power settings of your Akasa Intel Wall Street Canyon TDP Support BIOS computer, follow these steps:
1. Turn on the computer and press the F2 function key multiple times during system boot to enter the BIOS settings.
2. Go to the "Power, Performance and Cooling" tab in the BIOS settings.
3. Select the "External Ambient Temperature" parameters.
4. Adjust the following parameters:
- Package Power Limit 1 (Sustained): Set to 28
- Package Power Limit 2 (Burst Mode): Set to 28
- Package Power Time Window (Tau): Set to 1.00
5. Press the F10 function key to save the settings.
By adjusting these parameters, you can optimize the power usage of your computer under different conditions. It is important to note that these adjustments should be made by experienced users who understand the impact of these changes on the computer's performance and power usage.
Additionally, if you are using an Intel® NUC 12 Pro (Wall Street Canyon) with an Akasa fanless case and want to limit the Thermal Design Point (TDP) to prevent CPU throttling, follow the same steps mentioned above to adjust the TDP settings accordingly.
Add New Comment