User Manual Q&AAnswer
Nov 14, 2025 - 03:03 PM
To connect the bc637PCI-V2 to your host computer, follow these steps:
1. **Locate the PCI Slot:** Identify an available PCI slot on your host computer where you will install the bc637PCI-V2.
2. **Power Off Your Computer:** Before proceeding with the installation, make sure your computer is powered off and unplugged.
3. **Insert the bc637PCI-V2:** Carefully insert the bc637PCI-V2 into the PCI slot on your host computer. Ensure that the module is securely seated in the slot.
4. **Secure the Module:** Use the appropriate screws or fasteners to secure the bc637PCI-V2 in place within the PCI slot.
5. **Power On Your Computer:** Once the module is securely installed, power on your computer.
6. **Install Optional Drivers:** If you haven't already done so, install the optional drivers for Windows or Linux to facilitate the integration of the module with your operating system.
7. **Configure the Module:** Configure the module to obtain precise time from the GPS satellite system or time code signals as per your requirements.
By following these steps, you should be able to successfully connect the bc637PCI-V2 to your host computer and begin using its time and frequency processing capabilities.
Add New Comment