User Manual Q&AAnswer
Nov 14, 2025 - 09:10 AM
Enrolling the MC-312N NBIoT device and registering it with the device manager server is a crucial step to ensure proper functionality. Here is a detailed guide on how to enroll and register the device:
1. **Insert the SIM card:**
- Slide up the metal cover to the OPEN position.
- Open the cover and place the Micro SIM card in the tray with the chip face down.
- Close the metal cover and slide it back to the LOCK position.
2. **Insert or replace the batteries:**
- Use a flat-head screwdriver to remove the decorative cover.
- Unscrew the battery cover xxxx and remove the battery cover.
- Replace the batteries with the correct orientation (+ and - symbols matching the illustration).
- Close the battery cover and xxxx it back. Reattach the decorative cover.
3. **Enroll and register the device:**
- Leave the battery cover open.
- Follow the instructions on the application to enroll and register the device.
- Find your 15-digit IMEI number and PIN code printed on the box of the device when prompted by the application.
4. **Perform a link quality test:**
- Insert the SIM card and batteries.
- Leave the battery cover open.
- Open the user application to check the link quality (Strong, Good, Fair, or Poor).
By following these steps, you can successfully enroll and register your MC-312N NBIoT device with the device manager server. If you encounter any issues during this process, refer to the product manual for further troubleshooting steps.
Add New Comment